Description
Product Introduction
The PT-50T 1005 PCM multiplexer is designed with a standard 19-inch 1U high, plug-in card structure, featuring a total of 5 slots. The power disk occupies 1 slot, the main control disk occupies 1 slot, and the service disk occupies 3 slots. All boards support hot swapping for easy maintenance and upgrades.
The main control panel includes 2 optical ports, 4 E1 channels, and 2 Ethernet service channels. The service panel slot can accommodate various types of interface boards, such as FXS (16/24 channels), FXO (16/24 channels), 4W E&M (8 channels), RS232 (16 channels), ISDN (2 channels), MAG (16 channels), hotline (16 channels), and V35 (8 channels). The PT-50T offers comprehensive network management functions and is compatible with Fengtai Communications Company’s network management protocols.
Features
- Configurable as a comprehensive PCM device with up to 72 telephone/data channels, 2 Ethernet channels, and 4 E1 uplinks.
- Two optical interfaces support 1+1 backup function and can be set to independent working mode through network management.
- 4E1 supports access mode or transparent transmission mode with selectable 75Ω or 120Ω impedance.
- Two 100M line-speed Ethernet interfaces, fully adaptive to full/half duplex modes, supporting VLAN division.
- Flexible interface configuration allowing users to select the variety and quantity of interface boards.
- Network management port includes an Ethernet port and RS232 interface.
- Remote upgrade capabilities for device firmware and software.
- Uplink mode options: optical, E1, or Ethernet.
- Power supply options: 220VAC, -48VDC, or 220VAC + -48VDC.
- Complete alarm and status indication functions for easy maintenance and management.
Product Specifications
E1 Interface
- Interface rate: 2.048Mbps ±50ppm
- Interface code type: HDB3 code, compliant with G.703 standard
- Interface impedance: 75Ω or 120Ω
- Frame structure: Compliant with ITU G.704, G.706
- Jitter characteristics: Meets G.742 and G.823 standards
Working Power Supply
- Input voltage: Standard -48VDC and 220VAC
- Voltage range: -36VDC to -72VDC, 176VAC to 264VAC
- Power consumption: <50W
Working Environment
- Operating temperature: -10°C to +50°C
- Working humidity: 5% to 95% (non-condensing)
- Storage temperature: -40°C to +80°C
Optical Interface
- Interface rate: 155Mbps ±50ppm
- Output optical power: ≥-15dBm
- Receiving sensitivity: ≤-35dBm
- Light wavelength: 1310nm/1550nm
- Optical interface connector: SFP/LC
Ethernet Interface
- Speed: 10/100Mbps adaptive, full/half duplex adaptive
- Protocol: IEEE802.3, IEEE802.1Q (VLAN)
- Connector: RJ45
Physical Structure
- Dimensions: 440mm x 260mm x 44mm
- Weight: 4kg
